GPS


Repetidor GPS

Repetidor de señal satelital GPS

Usado principalmente para recibir la señal exterior satelital GPS dentro del auto y luego hacer el equipo de trabajo para amplificar la señal. Está hecho de una antena de recepción fuera del auto y la antena transmisora dentro del auto.

El uso de este equipo no es exclusivo en autos. Puede ser usado en camiones, containers, etc.

Specifications

Reception Frequency: 1575 MHz ± 5 MHz
Reception Amplifier Gain: 25~28 dB
Reception Noise Figure: ≤2 dB
Reception Out-off-band Attenuation: 7 dB ± 20 MHz
Transmitting Frequency: 1575 MHz ± 5 MHz
Transmitting Gain: 11~14 dB
Out-of-band Emission Inhibition: 10 dB ± 20 MHz
Transmitting Radius: 5 M
Power Supply (cigar lighter): 3 V, 5 V Compatible
Working Temperature: -45 ℃~+ 85 ℃
Storage Temperature: -50 ℃~+90 ℃
Humidity: 100%
Dimension:
  • Out-car unit: 40×47×13 (mm)
  • In-car unit: 48×48×15 (mm)


  • NOTES

    1. The sucker could be used on the mid-upward side of the window.
    2. The reception antenna is to be adsorbed on the top of the car while the transmitting antenna is adsorbed on the iron sucker.
    3. Switch on the plug at the cigar lighter-socket. Then you can receive the GPS signal with the handset.
    4. Do not to put the R and T antenna close together and 3 meter is necessary between them without hinder.


    Prueba Realizada con Equipos de Topografía



    Premio Bronce a la Gestión Competitiva 2009